323i rear anti roll bar links

For all your questions, problems and DIY stories
Post Reply
shadyracer01
Upcoming E21 fanatic
Posts: 81
Joined: Tue Dec 05, 2017 7:39 pm
My E21(s): 323i '82 Y x2, 1 in resto, 1 now spares

323i rear anti roll bar links

Post by shadyracer01 »

Can anyone advise on bolt diameter and collar length for rear rollbar links e21 323i?
I have two pairs, one pair on current car and one pair on my spare rear axle, but unsure which pair is correct for vehicle as there are differences in bolt diameter/length and collar length between pairs.
One pair looks to be M8, other M10, bushes seem correct on all. :?


User avatar
Jeroen
Site Admin
Posts: 29200
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: 323i rear anti roll bar links

Post by Jeroen »

ETK says M8x140mm
Regards/groeten, Jeroen
shadyracer01
Upcoming E21 fanatic
Posts: 81
Joined: Tue Dec 05, 2017 7:39 pm
My E21(s): 323i '82 Y x2, 1 in resto, 1 now spares

Re: 323i rear anti roll bar links

Post by shadyracer01 »

Thanks Jeroen, I also would like to know length of the spacer between bushes, even if just a rough measurement, I think someone has fitted nissan micra or similar links , spacer is only 10mm deep on m8 setup, and about 45mm deep on m10 setup...
e21Keith
E21 Fanatic
Posts: 476
Joined: Sun Jan 05, 2014 7:44 pm
My E21(s): '81 323i Manual

Re: 323i rear anti roll bar links

Post by e21Keith »

You can still order all the bolts, spacers and bushes from the main dealer, might be easier (it's what I did anyway)
User avatar
Jeroen
Site Admin
Posts: 29200
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: 323i rear anti roll bar links

Post by Jeroen »

ok well I don't have stock setup on hand here but perhaps someone else can be of help
Regards/groeten, Jeroen
Post Reply