320i Wheel Requirements
- Kamakazi21
- Newbee
- Posts: 4
- Joined: Fri Jul 02, 2010 4:07 am
- Location: Minnesota
- pistonheader
- E21 Fanatic
- Posts: 300
- Joined: Sat Jul 05, 2008 9:14 pm
- Location: Southampton, UK.
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
- Kamakazi21
- Newbee
- Posts: 4
- Joined: Fri Jul 02, 2010 4:07 am
- Location: Minnesota
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: 320i Wheel Requirements
Universal rims are pretty poor imo. I think they look a bit modern too but taste is a personal thing.
Re: 320i Wheel Requirements
no they would not work, they are 18", thay are prob wrong offset, and they look terrible.
you need sumin retro, classic, standard, or epic dish
you need sumin retro, classic, standard, or epic dish
BMW e21 - 320tsi - Project Rajay
Audi 50 RS
1/2 a BMW 2002 tii - Project Nipon
Smart 4/2 84bhp cabriolet - Company car
Audi 50 RS
1/2 a BMW 2002 tii - Project Nipon
Smart 4/2 84bhp cabriolet - Company car
-
- E21 Fanatic
- Posts: 406
- Joined: Sun Jul 06, 2008 7:46 pm
- My E21(s): looking
- Location: Bexley Kent
Re: 320i Wheel Requirements
You really can't go wrong with a BBS style x spoke or classic Alpina.They both compliment the E21.Have a trawl through the owners gallery.You won't be seen as "copying"if you choose the same as someone else.6 or 7 by 15 is the best combination,in my humble opinion.Oh,don't forget to make sure you have the right length wheel bolts.
Gaz
Gaz
There's one out there with my name on it.
-
- Upcoming E21 fanatic
- Posts: 68
- Joined: Thu May 27, 2010 9:16 pm
- Location: Berkshire, England
Re: 320i Wheel Requirements
is it ness to have alloy bolts with alloy wheels? will steel be ok, after reading another forum opinions vary.
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: 320i Wheel Requirements
Depends on the style / brand of wheel really. They're easily obtained and not expensive really anyway.
- PeteK
- Upcoming E21 fanatic
- Posts: 192
- Joined: Tue Nov 27, 2007 2:18 am
- My E21(s): 1979 323i Euro
- Location: Perth, Western Australia
- Contact:
Re: 320i Wheel Requirements
You probably haven't, but don't forget the hub diameter (57.1 mm).
Some of the "universal fit" wheel have larger hub bores and you then have to use bub spacers. I think they are dangerous and those universal fit wheels are rarely good quality.
Cheers
Some of the "universal fit" wheel have larger hub bores and you then have to use bub spacers. I think they are dangerous and those universal fit wheels are rarely good quality.
Cheers
Pete K
'79 323i (for good times)
'81 M535i (for collecting)
'75 520i (track machine)
'03 320i (for commuting)
'97 Laser
http://team-orange.blogspot.com/
'79 323i (for good times)
'81 M535i (for collecting)
'75 520i (track machine)
'03 320i (for commuting)
'97 Laser
http://team-orange.blogspot.com/