need help with swaybar washer order.including rubber plated washer

For all your questions, problems and DIY stories
Post Reply
Letmein
Newbee
Posts: 1
Joined: Tue May 10, 2022 12:31 pm
My E21(s): 1981 320i

need help with swaybar washer order.including rubber plated washer

Post by Letmein »

doing new front end work. have the 2 rubber plated washers and metal washers. i need a good diagram or list of how they install. i dont see what the rubber goes against. i think realoem is not correct on this diagram becouse the mount for my swaybar at the control arm(wishbone) is facing opposite direction. therefore if rubber washer went against the metal spacer side of the mount on control arm iit wouldnt make sense. the rubber on washer isnt even touching anything. anyway hope someone can help.thanks. so to be clear i need the order and which way the rubber washer faces.


User avatar
Jeroen
Site Admin
Posts: 29199
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: need help with swaybar washer order.including rubber plated washer

Post by Jeroen »

Like this imo, one set of bushings around the trailing arm, a spacer, then a set of bushings around the sway bar.

Image
Regards/groeten, Jeroen
Post Reply