316 - 1977 - petroscf - Greece
- uwbuurman
- E21 VIP
- Posts: 17790
- Joined: Fri Jun 12, 2009 4:49 pm
- My E21(s): 1978 type 1 323i 5speed dogleg Polaris
- Location: Ljouwert
Re: 316 - 1977 - petroscf - Greece
Indeed, that is an engine damper for M10 egnines in an e21. And if you don't have it on your car, I would say to mount it. There are two types, by the way. The Walloth link that you profided gives BMW number 11811245574. At bmwfans.info you can find out if its belongs fo your car.
- petroscf
- E21 VIP
- Posts: 1446
- Joined: Mon Nov 03, 2008 4:01 pm
- My E21(s): '77 EU 316 (2.0 - manual/dogleg - lsd)
- Location: ATHENS-GREECE
- Contact:
Re: 316 - 1977 - petroscf - Greece
Thanks for the replies
What is it that it does? I mean, I generally understand the meaning of vibration dampening but can anyone that had mounted it describe the difference with and without it?
Also, I guess I have the early one, but I saw that I do not have any other part needed in order to mount it (brackets rubbers etc) so I will have to order these - and then wait as most are not available at the moment, at least at W+N. However, as my M10 engine is a custom built one, probably by earlier than E21 era block etc, I guess most components are from 2002ti (?), I can't be totally sure that even the early set will fit
What is it that it does? I mean, I generally understand the meaning of vibration dampening but can anyone that had mounted it describe the difference with and without it?
Also, I guess I have the early one, but I saw that I do not have any other part needed in order to mount it (brackets rubbers etc) so I will have to order these - and then wait as most are not available at the moment, at least at W+N. However, as my M10 engine is a custom built one, probably by earlier than E21 era block etc, I guess most components are from 2002ti (?), I can't be totally sure that even the early set will fit
/oo=00=oo\
E21 Forever
E21 Forever
- petroscf
- E21 VIP
- Posts: 1446
- Joined: Mon Nov 03, 2008 4:01 pm
- My E21(s): '77 EU 316 (2.0 - manual/dogleg - lsd)
- Location: ATHENS-GREECE
- Contact:
Re: 316 - 1977 - petroscf - Greece
Anyone any idea of what to do with that speaker hole on top of the dash?
I mean, this is useless to most of us, isn't it? I was thinking whether there is a way to take advantage of that space in some way - especially when the point is not needed for additional gauges (I have that digital system at the bottom of the console, under the ashtray)
I mean, this is useless to most of us, isn't it? I was thinking whether there is a way to take advantage of that space in some way - especially when the point is not needed for additional gauges (I have that digital system at the bottom of the console, under the ashtray)
/oo=00=oo\
E21 Forever
E21 Forever
- Jeroen
- Site Admin
- Posts: 28179
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: 316 - 1977 - petroscf - Greece
I always hide my secret babe phone there
- petroscf
- E21 VIP
- Posts: 1446
- Joined: Mon Nov 03, 2008 4:01 pm
- My E21(s): '77 EU 316 (2.0 - manual/dogleg - lsd)
- Location: ATHENS-GREECE
- Contact:
Re: 316 - 1977 - petroscf - Greece
I was thinking of a custom construction to install carplay but I guess if I do anything like this I will be banned forever from the forum



/oo=00=oo\
E21 Forever
E21 Forever
- Jeroen
- Site Admin
- Posts: 28179
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: 316 - 1977 - petroscf - Greece
well as long as you can hide that modern shit haha
- petroscf
- E21 VIP
- Posts: 1446
- Joined: Mon Nov 03, 2008 4:01 pm
- My E21(s): '77 EU 316 (2.0 - manual/dogleg - lsd)
- Location: ATHENS-GREECE
- Contact:
Re: 316 - 1977 - petroscf - Greece
Car received its yearly service plus some extra tlc (good wash incl engine bay)
Will take a couple of pics although my relation with photobucket is not the best possible
However, during washing probably, the sound (and heat ? ) proofing foam that used to exist on the inner side of the hood came down. Well I do not complain as this has started happening at least a couple of years ago, so now I have to put a new one there. I know I can find it from time to time at W&N or other parts sources. However, I wouldn't mind "upgrading" if anyone has anything better to propose for that area.
Any suggestions would be appreciated
Will take a couple of pics although my relation with photobucket is not the best possible
However, during washing probably, the sound (and heat ? ) proofing foam that used to exist on the inner side of the hood came down. Well I do not complain as this has started happening at least a couple of years ago, so now I have to put a new one there. I know I can find it from time to time at W&N or other parts sources. However, I wouldn't mind "upgrading" if anyone has anything better to propose for that area.
Any suggestions would be appreciated
/oo=00=oo\
E21 Forever
E21 Forever
- petroscf
- E21 VIP
- Posts: 1446
- Joined: Mon Nov 03, 2008 4:01 pm
- My E21(s): '77 EU 316 (2.0 - manual/dogleg - lsd)
- Location: ATHENS-GREECE
- Contact:
Re: 316 - 1977 - petroscf - Greece
My car starring in a video clip for a new song of a young up coming Greek singer-composer



/oo=00=oo\
E21 Forever
E21 Forever
- Jeroen
- Site Admin
- Posts: 28179
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: 316 - 1977 - petroscf - Greece
Hahaha nice!
- nic65
- Upcoming E21 fanatic
- Posts: 69
- Joined: Tue Sep 18, 2018 2:12 pm
- My E21(s): 02/80 316 , 2000cc,5gear,4carbs
Re: 316 - 1977 - petroscf - Greece
when I saw the fire I feared for your E21...

- petroscf
- E21 VIP
- Posts: 1446
- Joined: Mon Nov 03, 2008 4:01 pm
- My E21(s): '77 EU 316 (2.0 - manual/dogleg - lsd)
- Location: ATHENS-GREECE
- Contact: