Re: 320/6 from Lithuania
Posted: Fri Nov 14, 2014 3:45 pm
Clear, and at least now you have some money left to buy beer! 
haha, yeah.Jeroen wrote:Clear, and at least now you have some money left to buy beer!
And these too :}
bmwe21.net forums
Welcome to the E21 resource, the worldwide owners gallery, and get your answers, fast! ____ Scroll naar beneden voor het Nederlandse forum!
https://bmwe21.net/forum/
320/6 from Lithuania
Page 2 of 3
Re: 320/6 from Lithuania
Posted: Fri Nov 14, 2014 3:49 pm
And these too :}
Re: 320/6 from Lithuania
Posted: Sat Nov 15, 2014 1:35 pm
grazus ratai 
Re: 320/6 from Lithuania
Posted: Sat Nov 15, 2014 4:02 pm
Yes, I agree, nice wheels!bmw320 wrote:grazus ratai
Re: 320/6 from Lithuania
Posted: Sun Nov 16, 2014 3:59 pm
started working on the wheel arches in the rear
i have the same wheels, bouught them some time ago, all 16x9j, just need to paint and polsh them up
Iš nterneto pavyzdinė foto. Turiu tokius pat, tik visi 9j, reik nusipoliruot ir nusidažytbmw320 wrote:grazus ratai
hah, you're reading in lithuanian?uwbuurman wrote: Yes, I agree, nice wheels!
i have the same wheels, bouught them some time ago, all 16x9j, just need to paint and polsh them up
Re: 320/6 from Lithuania
Posted: Mon Nov 17, 2014 3:35 pm
Re: 320/6 from Lithuania
Posted: Mon Nov 17, 2014 5:02 pm
Good progress! But will 9j fit?
Re: 320/6 from Lithuania
Posted: Mon Nov 17, 2014 5:17 pm
thanks, but next to yours mine looks like childs playuwbuurman wrote:Good progress! But will 9j fit?
this one's on 8x16 et5 and 9x16 et0.
mine are 9x16 et~15.
they'll be sticking out past the arch just 3mm more. (and 23mm closer to the shock) in the front
Re: 320/6 from Lithuania
Posted: Mon Nov 17, 2014 6:02 pm
For personally the rear ones are to wide. But he, it's your car! I like those BBS aswell!
Re: 320/6 from Lithuania
Posted: Mon Nov 17, 2014 6:19 pm
Yeah, his rears are et0,that's why they stick out so much.uwbuurman wrote:For personally the rear ones are to wide. But he, it's your car! I like those BBS aswell!
Mine with et15 should be 15mm deeper from the arch and closer to the shock, that should make them look a bit better
Re: 320/6 from Lithuania
Posted: Tue Nov 18, 2014 2:19 pm
Started tearing down the interior and poking around with a screwdriver 
found the last bit of cancer on this shock tower. Will finish it up tomorrow.
Also tried grinding down the welds, but the sparks form a freaking tornado of fire in the boot by bouncing off of all the surfaces, not even the protective glasses help, so need to figure out a better outfit (preferably with a big hoodie) and get some sort of a mask.
found the last bit of cancer on this shock tower. Will finish it up tomorrow.Also tried grinding down the welds, but the sparks form a freaking tornado of fire in the boot by bouncing off of all the surfaces, not even the protective glasses help, so need to figure out a better outfit (preferably with a big hoodie) and get some sort of a mask.
Re: 320/6 from Lithuania
Posted: Tue Nov 18, 2014 9:06 pm
Thats a known place were they rot like hell. Good luck closing this!
Re: 320/6 from Lithuania
Posted: Tue Nov 25, 2014 3:11 pm
Dragged this home in the boot today. m20b25 from e34.
Got it for cheap (~100eur). After i sell the gearbox, alternator, starter, ps pump, sump and get my old engine to the scrapyard i should get pretty much all the money back so probably will do a bit of rebuilding.
Got it for cheap (~100eur). After i sell the gearbox, alternator, starter, ps pump, sump and get my old engine to the scrapyard i should get pretty much all the money back
so probably will do a bit of rebuilding. 
Re: 320/6 from Lithuania
Posted: Tue Nov 25, 2014 4:15 pm
Make it injection or keep it carb'd?
Re: 320/6 from Lithuania
Posted: Tue Nov 25, 2014 4:22 pm
make it turbo 