my WARHORSE - 320i turbo

Post Reply
User avatar
DC
E21 Fanatic
Posts: 213
Joined: Sat Jan 05, 2008 12:44 pm
Location: Prague, Czech Republic
Contact:

Post by DC »

Tate wrote: Dont change them..
Somebody stole them last week.. grrrrrrrrr


Image <- 320i Turbo
User avatar
DC
E21 Fanatic
Posts: 213
Joined: Sat Jan 05, 2008 12:44 pm
Location: Prague, Czech Republic
Contact:

Post by DC »

new wheels for my car ->

they have stolen me 14" so I bought 15" :-)
Image
Image <- 320i Turbo
User avatar
yeseyes
E21 starter
Posts: 22
Joined: Tue Feb 19, 2008 1:05 am
Location: PALESTINE
Contact:

Post by yeseyes »

nice color
http://photos-a.ll.facebook.com/photos-ll-snc1/v2113/150/103/756006942/n756006942_1464776_7239.jpg
User avatar
Stefu
Newbee
Posts: 2
Joined: Fri Feb 29, 2008 9:19 pm
Location: Hyvinkää, Finland

Post by Stefu »

Oh sweet lord, is that the original colour? I have never seen it before.
User avatar
DC
E21 Fanatic
Posts: 213
Joined: Sat Jan 05, 2008 12:44 pm
Location: Prague, Czech Republic
Contact:

Post by DC »

nope, it´s repaint in some porsche blue said previous owner
Image <- 320i Turbo
User avatar
Stefu
Newbee
Posts: 2
Joined: Fri Feb 29, 2008 9:19 pm
Location: Hyvinkää, Finland

Post by Stefu »

OK, I thought so. Sweet color anyway. Those old rims looked a lot better, I am also searching for similar ones (14")

Or does the 315 keep a good torque with 15"? It is still only 75 bhp....
User avatar
Sierpien
E21 Fanatic
Posts: 245
Joined: Wed Feb 22, 2006 2:21 pm
My E21(s): C1 Turbo Alpina tribute, 316 Sepiabraun
Facebook page: https://www.instagram.com/fedecx5aa/
Location: Uruguay
Contact:

Post by Sierpien »

I like more the BBS rims than the hartge ones, they look much better on the car.

Keep up the good work!!!
My Fake E21 Alpina "C1 Turbo" tribute car!
"Sepiabraun" 1.8 M10 swapped 316


"I thought the block was good for 200, even 300 hp, but I never thought it would take 1000 horsepower."

Alex von Falkenhausen
User avatar
DC
E21 Fanatic
Posts: 213
Joined: Sat Jan 05, 2008 12:44 pm
Location: Prague, Czech Republic
Contact:

Post by DC »

Hartge are sold, I will have 15" BBS on this car - as you can see in other thread here I am converting from 315 -> modified 320/4 so I´ll have sufficient power :-)
Image <- 320i Turbo
User avatar
Sierpien
E21 Fanatic
Posts: 245
Joined: Wed Feb 22, 2006 2:21 pm
My E21(s): C1 Turbo Alpina tribute, 316 Sepiabraun
Facebook page: https://www.instagram.com/fedecx5aa/
Location: Uruguay
Contact:

Post by Sierpien »

DC wrote:Hartge are sold, I will have 15" BBS on this car - as you can see in other thread here I am converting from 315 -> modified 320/4 so I´ll have sufficient power :-)
I have that idea too, but finally i modified the 1600cc.

Good idea to keep the 4 cilinder, i think the car would handle a lot better with that engine, the six is too heavy i think.
My Fake E21 Alpina "C1 Turbo" tribute car!
"Sepiabraun" 1.8 M10 swapped 316


"I thought the block was good for 200, even 300 hp, but I never thought it would take 1000 horsepower."

Alex von Falkenhausen
mobius

Post by mobius »

I would invest in some locking wheel studs to protect your 15" BBS.
User avatar
DC
E21 Fanatic
Posts: 213
Joined: Sat Jan 05, 2008 12:44 pm
Location: Prague, Czech Republic
Contact:

Post by DC »

mobius wrote:I would invest in some locking wheel studs to protect your 15" BBS.
yes, definitely ;-)
Image <- 320i Turbo
User avatar
Sierpien
E21 Fanatic
Posts: 245
Joined: Wed Feb 22, 2006 2:21 pm
My E21(s): C1 Turbo Alpina tribute, 316 Sepiabraun
Facebook page: https://www.instagram.com/fedecx5aa/
Location: Uruguay
Contact:

Post by Sierpien »

mobius wrote:I would invest in some locking wheel studs to protect your 15" BBS.
Good idea!!!
My Fake E21 Alpina "C1 Turbo" tribute car!
"Sepiabraun" 1.8 M10 swapped 316


"I thought the block was good for 200, even 300 hp, but I never thought it would take 1000 horsepower."

Alex von Falkenhausen
User avatar
DC
E21 Fanatic
Posts: 213
Joined: Sat Jan 05, 2008 12:44 pm
Location: Prague, Czech Republic
Contact:

Post by DC »

first sprint with the new engine

Image <- 320i Turbo
User avatar
Simon
Upcoming E21 fanatic
Posts: 86
Joined: Sun Nov 12, 2006 9:06 pm
Location: Essex

Post by Simon »

Nice and clean under the bonnet :D
User avatar
Sierpien
E21 Fanatic
Posts: 245
Joined: Wed Feb 22, 2006 2:21 pm
My E21(s): C1 Turbo Alpina tribute, 316 Sepiabraun
Facebook page: https://www.instagram.com/fedecx5aa/
Location: Uruguay
Contact:

Post by Sierpien »

DC wrote:first sprint with the new engine

Cool!!!!, it handle very nice now, congrats
My Fake E21 Alpina "C1 Turbo" tribute car!
"Sepiabraun" 1.8 M10 swapped 316


"I thought the block was good for 200, even 300 hp, but I never thought it would take 1000 horsepower."

Alex von Falkenhausen
Post Reply