Pandemoniums 316 restore
- Jeroen
- Site Admin
- Posts: 29892
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: Pandemoniums 316 restore
Pity but clear. I already couldn't remember any recent updates hence I was getting curious. But a Caterham can be good fun as well! Anyway, sorry for the OT!
Regards/groeten, Jeroen
-
- E21 Pro
- Posts: 527
- Joined: Sun Oct 07, 2012 1:19 pm
- My E21(s): E12 535i T (ish)
- Location: Scotland Ayrshire
Re: Pandemoniums 316 restore
been measuring again, looks like the rears i have are a Rally/forest spec, hence why they are so long with a lower spring rate of around 200lb/inch, with the escort tops on they measure 24"
I think i will suck it and see with them, and make the strut top change to single bolt type. it makes life a lot easier in the future to change struts to upside down high pressure gas units anyway.
I think i will suck it and see with them, and make the strut top change to single bolt type. it makes life a lot easier in the future to change struts to upside down high pressure gas units anyway.
-
- E21 Pro
- Posts: 527
- Joined: Sun Oct 07, 2012 1:19 pm
- My E21(s): E12 535i T (ish)
- Location: Scotland Ayrshire
Re: Pandemoniums 316 restore
I have noticed a lot of bmw engined lotus 7 style cars lately, as well as a few escort rally cars.
If i was'nt doing the E21 it would have been a caterham thing probably.
If i was'nt doing the E21 it would have been a caterham thing probably.
- Jeroen
- Site Admin
- Posts: 29892
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: Pandemoniums 316 restore
What BMW engines are they using for those conversions?
Regards/groeten, Jeroen
Re: Pandemoniums 316 restore
1982 323i ("Test Mule" - to become an M20 powered track car)
1983 316 (Taiga Thunder - S54 Track car)
1982 635csiA (Another Weldathon)
2004 330d Touring (The Daily Hack / Tow Car / Load lugger)
1974 3.0 csi (The first Weldathon)
1983 316 (Taiga Thunder - S54 Track car)
1982 635csiA (Another Weldathon)
2004 330d Touring (The Daily Hack / Tow Car / Load lugger)
1974 3.0 csi (The first Weldathon)
- Jeroen
- Site Admin
- Posts: 29892
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: Pandemoniums 316 restore
I could imagine that but I was curious if they had other solutions in order to have less weight on the front axle
Regards/groeten, Jeroen
-
- E21 Pro
- Posts: 527
- Joined: Sun Oct 07, 2012 1:19 pm
- My E21(s): E12 535i T (ish)
- Location: Scotland Ayrshire
Re: Pandemoniums 316 restore
The escorts where m52 b28, same reasons for the conversion in the E21.
Marlin are doing kits as well.
Probably the reason for the recent increase in used parts prices
Remember this on Top Gear:

Weismann bmw v10 M3 based thing.
Marlin are doing kits as well.
Probably the reason for the recent increase in used parts prices
Remember this on Top Gear:

Weismann bmw v10 M3 based thing.
Re: Pandemoniums 316 restore
I have seen one of these gkd cars at a show, they are a LOT bigger then the lotus 7 - like a giant version of it.
[img]http://s13.photobucket.com/albums/a285/nasbucket/forumsig.jpg[/img]
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: Pandemoniums 316 restore
One of them left Gaydon when we did. Bloody quick.