Mark's 316 M52/2.8 + Cat cams & Jenvey ITB's

Post Reply
dannyboy
E21 Fanatic
Posts: 431
Joined: Sun Aug 09, 2009 5:07 am
Location: london heathrow

Re: Mark's M52/2.8

Post by dannyboy »

i came into work tonight (night shift) to find a few old copies of practical performance car on the table... and low and behold there was MiB when you 1st got it showing it being corner weighted and with the single lights we swapped over from my blue 316 that you drove me down to buy :thumbsup And another copy had the TWR in it when you first got it.... brought a smile to face and made me more determinded to get my 3.5 back on the road again!!!!! :twisted:
(even tommi's gold 323i one was in one for the £999 ppc challange)


e21 335i gone but not to far.
e21 316.. still
ford puma..(wifes honestly)
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: Mark's M52/2.8

Post by e21-Mark »

dannyboy wrote:made me more determinded to get my 3.5 back on the road again!!!!! :twisted:
Looking forward to it! :launch
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: Mark's M52/2.8

Post by e21-Mark »

Got some arches from the US that are similar to 02 turbo arches but were made for the e21 specifically.

Image

Image

Image

Image
User avatar
Jeroen
Site Admin
Posts: 29939
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: Mark's M52/2.8

Post by Jeroen »

:thumbsup
Regards/groeten, Jeroen
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: Mark's M52/2.8

Post by e21-Mark »

Just waiting on parts from Wallace & Grommet.

2 outer sill panels
Rear jacking points

Also having new front wings & welding up the hole from the removed wiper spindle before the car gets a fresh paint. Also plan to remove the door mirrors.

3 years of daily use, 3 engine swaps and 30k miles have taken their toll but it should be good as new and ready for another few years service.
cobbler2u
E21 Pro
Posts: 843
Joined: Fri Apr 17, 2009 8:17 pm
My E21(s): 323i baur
323i special
328 sport
325i
Location: hertfordshire

Re: Mark's M52/2.8

Post by cobbler2u »

Wern't it cheaper to get sills from here.
I thought there was a problem with the quality of ther parts
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: Mark's M52/2.8

Post by e21-Mark »

To be honest I would have gone to main dealer but Mick @ Pristine ordered them. As the metal has to be altered and dressed to fit I doubt it'll be an issue. The wings are genuine though as those I do want to fit without a hammer! :)
User avatar
Jason_323i
E21 Pro
Posts: 756
Joined: Sun Jan 23, 2005 3:43 pm
Facebook page: https://www.facebook.com/#!/e21jason
Location: Dubai UAE

Re: Mark's M52/2.8

Post by Jason_323i »

got sills here if you need them quick and can cancel W&N

and those grp arch's do not look they have much extension, have you measured them.

Also to do the sills on an e21 proper your mean tot take the bottom of the rear quarter panel of ig you have bought genuine outer sills

Jason
BMW e21 race car supercharged s14 cage and fabrication by www.chizfab.com
Z3M Coupe
2.8 Z3 Coupe
Caterham Supersport
Clio 172 Cup factory race car(50%)
Ferrari 348 Challenge track car
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: Mark's M52/2.8

Post by e21-Mark »

I think Mick's already ordered everything but thanks Jason, appreciate the offer. I just asked Mick to give MIB a thorough inspection and put right any problems he found. Obviously Mick's been doing e21's for years and his work is top notch so I know MIB will be totally mint once again. :)
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: Mark's M52/2.8

Post by e21-Mark »

Progress...

Image

Image

Image

I spy Lemonayd's lovely 323 on the ramps. Looked stunning when I was there last week. Hopefully the TWR will look similar.

Image

Image
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: Mark's M52/2.8

Post by e21-Mark »

More progress today. Just goes to show, no matter how solid your e21 is, once you start looking properly, you can find all sorts. Still, better to do it properly now and do the job once. It should be a few years till needs doing again - I hope!

Image

Image

Image

Image

Image
Jacko
E21 Fanatic
Posts: 202
Joined: Mon Oct 19, 2009 12:08 pm
Location: Rossendale

Re: Mark's M52/2.8

Post by Jacko »

Good to see progress pics like this, it has to get worse before it can get better.
1986 E28 M535i - Car stripped to shell ready to be blasted
1981 E21 323i - 2.8 24v on throttle bodies & cams - 3.0 conversion soon.

[img]http://i3.photobucket.com/albums/y99/Arnold_the_swimmer/My%20M535i/IMG_0447sig-1.jpg[/img]
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: Mark's M52/2.8

Post by e21-Mark »

My car is finally rust-free once more! :banana

The seats now sit at the height they should do :shake

Fuel tanks back in. :thumbsup

Rear beam back in. :thumbsup

Sump seal & diff seal arrived from main dealer. :stupidme

Whole car's primed and ready for paint tomorrow. :shake

Hopefully collect on Tuesday. :launch

If anyone would like to buy one of my kidney's please pm me. :screwy
User avatar
arshad76
E21 Pro
Posts: 951
Joined: Thu May 26, 2005 11:06 am
My E21(s): Considering another E21
Location: Manchester England

Re: Mark's M52/2.8

Post by arshad76 »

e21-Mark wrote:If anyone would like to buy one of my kidney's please pm me. :screwy
Kidney grills maybe :lol: It's good that you've kept on top of it though, a little rust is better than rot and I've learnt the hard way just to ignore rust and hope it goes away.
UK Moderator
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: Mark's M52/2.8

Post by e21-Mark »

arshad76 wrote: It's good that you've kept on top of it though, a little rust is better than rot and I've learnt the hard way just to ignore rust and hope it goes away.
I knew the rear jacking points were in need of some love when I bought the car a couple of years ago and there's been a square of sticky backed plastic, over the hole where the wiper was removed, for must be 2 years?! As you say though, it needed doing before it became structural rot and way more expensive to put right.

I can't wait to see how it looks on Tuesday.
Post Reply